Fire Alarm Systems

Zeta Alarm Systems SP-M Simplicity Micro 1/4 Loop Analogue Addressable Fire Control Panel

The Simplicity Micro is a unique concept that provides the best possible entry level solution for addressable fire alarm systems. It is directed primarily towards small installations, where traditionally the use of addressable systems would have been considered cost prohibitive. These include single loop connection, minimal commissioning & configuration, 20 character label for each connected device and a 2,048 history event log

Zeta Alarm Systems Simplicity Plus M Analogue Addressable Fire Control Panel

The Simplicity Plus M (Metal Enclosure) is the ideal introduction to the world of addressable fire alarm panels.As its name suggests, it has been designed with ease of use in mind, using pre-programmed values for its programming options. The installer simply needs to configure the loop and enter text labels via the built in keypad (optional).The Simplicity Plus 252 has user definable zones, option for zonal or common alarm operation, options for I/O operation, alarm verification and user selectable languages. Available in 64, 126 or 252 devices

Zeta Alarm Systems SP Simplicity Plus Analogue Addressable Fire Control Panel

Simplicity Plus panels are designed to bridge the gap between conventional and addressable systems. They are designed to be easy to install, and have no complex PC setup routine assosiated with some larger addressable systems. The Simplicity Plus is available in 64 or 126 device versions and has user definable zones, option for zonal or common alarm operation, options for I/O operation, alarm verification and user selectable languages. Available in 64 and 126 devices

Zeta Alarm Systems Premier Quatro Analogue Addressable Fire Control Panel

The Primier Quatro is the new 4 loop Analogue Addressable Fire Alarm Control Panel. It is available in 1, 2, 3 or 4 loop versions. Followig on from the popularity of the Simplicity & Premier AD range of panels, the Premier Quatro includes more advanced cause & effect programming, and also includes a larger LCD display (increaded to 4x40 characters). Custom PC software will allow programming data to be transferred to the control panel.

Zeta Alarm Systems Premier AL Analogue Addressable Fire Control Panel

The premier AL is designed for systems that need more programability of the system outputs. It can be set up via a PC (RS232) or via the main controlpanel. It is networkable and can contain up to 60 loops. LPCB approved. Available in 1, 2, 3, 4, 5, 6, 7 and 8 loops

Zeta Alarm Systems Fyreye Analogue Addressable Detectors

The Fyreye (pronounced fire-eye) range of detectors are analogue addressable detectors working to the Zeta Addressable Protocol. They have a Red LED to indicate an alarm condition. Available in optical smoke, heat and opto-heat options

Zeta Alarm Systems Detector Common Base

There are 4 types of base suitable for use on an addressable system, a common base, a relay base, a sounder base, or a short circuit protection isolator base

Zeta Alarm Systems Addessable Remote Indicator

Fyreye addressable detectors do not have an output for a conventional remote LED. Instead, We have designed an addressable LED which sits on the same addressable loop

Zeta Alarm Systems Premier Addressable Beam Detector

The Fyreye Reflective Beam Detector comprises a single unit incorporating an Infra-red transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. Should a predetermined level be reached, the detector will signal an alarm., available in 5-50m , and 50-100m versions.

Zeta Alarm Systems Addressable Manual Callpoints

The ZT-CP2/AD is an addressable manual call point which has been engineered to comply with EN54 part 11.It is a resettable call point that signals an alarm with a yellow flag entering the window area and a red alarm LED illuminating. The modern housing is supplied with a back box which has plenty of room for fitting the cables and also includes 2 x 20mm knockouts for glanded cable entry and protective cover. Available also in weatherproof and explosion proof conditions.

Zeta Alarm Systems Addressable Miditone Sounders

The miditone sounder range is designed to fit a 1 gang box. It comes supplied with a back box for surface mounting. Available option with flasher

Zeta Alarm Systems Addressable Securetone Sounders

The Securetone Range is the latest sounder design from Zeta Alarms. They are designed for fitting with no visible screw fixings.  The Securetone 2 addressable sounder has a low profile design which makes it ideal for locations where sounders are required to be unobtrusive. It is designed to work with the complete range of Zeta addressable control panels. Available option with flasher

Zeta Alarm Systems Addressable Interface Modules

The Zeta addressable interface units are used to interface external equipment .The ZIU has a single switch input (voltage free). The ZIOU has a switch Input and a relay output. The ZSCC is used to connect conventional sounders toan addressable loop. The ZTZM is used to connect conventional detectors to an addressable loop. The ZSCC & ZTZM require a separate 24V supply.

ZETA ALARM SYSTEMS Premier Elite Conventional Panel

The Premier Elite 1-8 zone fire alarm panels are ideal for small to medium sized installations.  They meet all the requirements of EN54 parts. It has 2 sounder circuits , a fault relay, a fire relay. It has sounder delay and zone disable facilities. Repeater Panel is available

ZETA ALARM SYSTEMS Premier SX Conventional Panel

The Premier SX is LPBC approved to EN54 pt2 & pt4. It is available in 1,2,4,6 or 8 zone sizes. It has 2 sounder circuits , a fault relay, a fire relay, and aClass Change input. It has sounder delay and zone disable facilities, and has a 1 man test mode. Repeater Panel is available

ZETA ALARM SYSTEMS Premier M Plus Conventional Panel

The Premier M Plus control panels are designed to fulfil the requirements of EN54 parts 2 & 4 as well as being easy to install, operate and maintain.
Being of modular construction, the basic M Plus panel has 8 zone capacity, expandable to 16, 20 and 24 zones. The Premier M Plus is suitable for surface mounting or semi-flush fitting (with just the door protruding).

ZETA ALARM SYSTEMS Gas Extinguishing Control Panel

The Premier EX8 has been designed to BS EN 12094-1:2003 & EN54 parts 2 & 4 standards. It has 2 “crossed zones” for co-incidence detection for the extinguishing circuit, and 4 conventional zones for standard fi re alarm detection for the rest of the installation (nonprotected area). The panel has a large variety of inputs & outputs, allowing it to connect to a wide variety of equipment. The panel has a built in manual release call point with 2 stage operation to initiate the gas release. The panel also has a serial output to an optional 4 wire repeater panel.

ZETA ALARM SYSTEMS Conventional Detectors

The Fyreye (pronounced fire-eye) range of detectors are conventional detectors which operate at 9 - 33 volts DC. They have a Red LED to indicate analarm condition. They have a Remote LED output which is used to drive alarm indicators which are used when detectors are behind locked doors. Available optical smoke, heat fixed and rate of rise, combined smoke and heat

ZETA ALARM SYSTEMS Conventional Flame Detector

The Fyreye ultra-violet flam detector is particularly suited to applications where flames can be expected to develop initially rather than smoke. This is typically due to the nature of the materials being protected for instance camera film, computer, audio & video tapes or disks.The detector is for indoor use only and should not be exposed to spurious sources of UV, such as sparks, uncovered halogen lights, lightening, etc. as these may trigger a false alarm.

ZETA ALARM SYSTEMS Conventional IR Detectors

The new range of UV/IR and Triple IR Flame distances with the highest immunity to false alarms.The ZT-‐20P and the ZT-‐20EX can detect a 0.1m2 gasoline New features include RS484/RS232 compatabilities for digital communications; lower power requirements; and a compact, lighter design.ZT-‐20EX and ZT-‐500EX series are approved to ATEX by DNV for explosion-‐proof