Standalone safety equipment

Kidde Europe 0914UK 9V Battery Operated Smoke Detector

This Kidde 0914UK is a compact and basic smoke alarm for protection to the family and home. The Kidde 0914UK is easy to install; it has a sealed-in power source so this will reduce user-maintenance; and it has a test button to check battery and alarm operation. Also fitted to the Kidde 0914UK is a red LED to indicate unit power is on.

ZETA ALARM SYSTEMS ZD-SO-601 9V Battery Operated Photoelectric smoke detector

The Versatile and reliable standalone battery operated smoke detector are designed to comply with BSI standards. They are perfectly suitable for the installation in all environments, especially the living room, kitchen, garage, factory

ZETA ALARM SYSTEMS SA-730 9V Battery Operated Rate of rise / fixed temperature heat detector

The Versatile and reliable standalone battery operated heat detector are designed to comply with BSI standards. They are perfectly suitable for the installation in all environments, especially kitchen, garage, factory

Everday Technologies ENG-965 220V Natural Gas Detector with relay output

Advanced detection of Methane, Propane and Butane gas leakage in the premises. Works with any building automation system or other control device. Built-in local sounder; alarm level reaches 70 dB. Five-year limited warranty . ENG/ECG Series sensors are CE approved and manufactured according to UL and ISO 9001 standards, 220V & 24V available

Everday Technologies F-911 220V Dual Methane/Propane and Butane gas leak detector

F-911 series gas detectors have sleek modern look, they are easy-to-use, powerful, dependable and accurate. F-911 series gas detectors help to identify potentially dangerous situation when methane, propane or butane gas leakage occurs. Five-year limited warranty

IMAKE GC-79 Gas & CO Combination Detector

* Excellent Reliability and High Stability
* Double Electrochemistry Sensors inside, one is for Gas, another one is for CO
* Self Test Function
* Visual and Audible Alarm Function
* With Battery Back Up, un-rechargeable, can work for 8 hours after power failure
* Sensor Fault Self Test Function
* Low Power Consumption
* Able to detect Coal Gas, LPG, Natural Gas and CO

AMOS UK AMOS 550 Natural Gas Detector 230V AC with relay output

The detector is specially designed for all household situations. In particular where appliances may be left unattended or there is a risk of gas flames blowing out or being forgotten to be lit. It is mainly used for gas cookers but also can be used to protect fires and other gas appliances.

IMAKE GD-82 Natural Gas Detector

* Gas Detector with 220VAC and 9V battery back-up

* Sensitivity : 3%-20%LEL

* Power Consumption : 1.7W

* Power, fault and Alarm indication

* Horn Level :85 Decibels

* Type Of Gas Sensed :

+ LPG (Butane, Propane)used in normal and mini gas bottles

+ Gas from piping system (city gas) and natural gas (Methane)

* Connected with Valve (12VDC Output) model GD-82V optional

 battery not included

Everday Technologies M-330 9V Battery Operated CO Detector

Ergonomic design of detector casing ;Sounding a loud alarm signal of 85 dB at alarm mode  Equipped with a test button for users to test its detectability any time. M 816 Series sensors are CE approved, and under approval of LPCB BSI Kite mark, manufactured according to BS 7860:1996 and ISO 9001 standards.

Everday Technologies ECO-983

12/24V Carbon Monoxide Detector with relay output

Carbon Monoxide (CO) is the most commonly encountered and pervasive poison in our environment. ECO-983 gas detectors help to identify potentially dangerous and life-threatening situations, when there is high concentration of CO gas in the premises. ECO-983 series gas detectors have sleek modern look, they are lightweight and easy-to-use, yet powerful, dependable and accurate. 

Kidde Europe UK 9CO-5UK Battery Operated Carbon Monoxide Alarm

This basic carbon monoxide alarm is suitable in or near all living areas

IMAKE CO-80LCD Carbon Monoxide Detector

 

* Power Supply: 3*1.5V AA batteries

* Sensitivity/Alarm Time:

Within 60~90 minutes @ 50ppm CO concentration;

Within 10~40 minutes @ 100ppm CO concentration;

Within 3 minutes @ 300ppm CO concentration

* Frequency 3±0.5KHZ

* Low-bat and Mal-function Indicator

* Audibility: 85dB ( at 1m distance )

* Power consumption: 0.3mW

*  3 Digits LCD Displayer Optional

IMAKE WD-501 Water Alarm Detector

* ABS plastic house
* Build-in buzzer alarm
* Apply to detect the leakage of conductive liquid
* Install the water detector on the wall near the floor
* Easy installation
* Ideal for water level detector

NC/NO(1A 24VDC)

60x25x90mm

Nushika Rechargable Search and rescue Emergency torch

IC International Bridela Flat Fire Blanket

The Bridela fire blanket fully complies with the requirements of the European standard BS EN 1869 and has been independently tested and certified accordingly. It is available in a variety of standard sizes and has the added benefit of over 25 years of fire protection experience behind it. Efficiently packaged in a choice of containers for domestic or industrial use, these blankets, when draped over a fire, smother the danger by starving the fire of oxygen, available Sizes 0.9x0.9m, 1,0x1,0m,1,2x1,2m, 1,8x1,8m

Evolution First Aid Kits

Fully stocked and complete with Health & Safety regulations Available in Modular and Standard format. Standard Kits come with a simple wall hanging bracket. The Modular Kit features a clip-on backplate with label for easy kit identification, as well as shelves for the orderly storage of the kit content Quick release allows Modular kit to be taken to the incident location
Several Modular Kits can be combined to form a customised first aid point by adding bracket header, available for 1-5 Person, 10 Persons, 20 Persons, 50 Persons

UNION U-800 Series Panic latch bar for single doors

Panic bar a bar that spans an emergency exit door on its interior and opens the latch when pressure is applied. Available in horisontal and vertical bars

Franklin Anti Slip Roll Tape

AntiSlip Safety Tape Roll Ideal for walkin boxes Black grit material with adhesive back can be used indoors or outdoors For wood concrete or metal surfaces, available in 1' W x 60 Ft (2.5cm W x 18.2m) and 2' W x 60 Ft (5cm W x 18.2m)

Davis Instruments Vantage Pro2 Weather Station

Vantage Pro2™ weather stations are available in both wireless and cabled ver-sions. All include our innovative integrated sensor suite, which combines our rain collector, temperature and humidity sensors, and anemometer all into one package—making setup easier than ever and improving performance and reliability. Customize your weather station by adding additional consoles or one or more of the special-purpose stations. available in wired and wireless models

DAVIS WeatherLink for Vantage Pro2

Software to monitor and archive weather data, Windows, serial port & USB port